BVS Wolfhound pro cellphone detector

PRODUCTS  > Counter-surveillance  > BVS Wolfhound pro cellphone detector

BVS Wolfhound pro cellphone detector

The Wolfhound-PRO cell detector uses a narrow-band/high-selectivity receiver controlled by an on-board processor. The Wolfhound-PRO receiver has a resolution bandwidth of 4 MHz and uses a square-law detector. The receiver can be set to scan multiple up-link frequency bands assigned to North America, the European Union, Asia and Australia.

Wolfhound-PRO Cell Phone Detector Advantages: 

? Receiver design boasts a dynamic range of 60 dB with user selectable sensitivity 

? User selectable sensitivity from -83 dBm to –53 dBm with a resolution of 2dB for detection in a noisy environment

 ? Selectivity rejection of at least 50 dB at 1 MHz from the uplink frequency bands provides high immunity from false triggering caused by base stations, personal communication devices and other sources of RF interference 

? Discovery and PC logging capability allows the user to record and timestamp multiple cellphones simultaneously 

? Passive RF detection is non-invasive making it ideal for swift and warrantless law enforcement operations 

? User selectable mobile frequency bands allow the same unit to be used around the world; both USA & international support 

? Detects and displays the phone’s transmitting frequency with resolution + 2 MHz / + 10 MHz 

? Detects U.S. DECT 6.0 cordless phones and even GPS trackers 

? Integrated laser-assisted directionality (green 532 nm laser, 50 feet mimimum span) 

? Internal Lithium-ion battery provides runtime of 4+ hours 

? Weighs less than 2 lbs. (30 oz.) fully loaded or just over 1 lb. (18 oz.) using omni-directional antenna

Specification: 

RADIUS OF COVERAGE AREA 150 feet (~50 meters) under typical conditions 

DYNAMIC RANGE 60 dB 

SENSITIVITY -83 dBm 

DETECTOR RESOLUTION 2 dB 

BANDWIDTH RESOLUTION 4 MHz / 20 MHz 

SELECTIVITY REJECTION >50 dB @ 1 MHz from uplink band edges 

RECEIVING MODES High-speed scanning (uplink cellphone bands) 

ANTENNAS SUPPORTED Included Direction ffnding (ffeld-swappable multiband panel antenna with SMA connector) Included Omni-directional (quarter-wave multiband, monopolar antenna with SMA connector)